2.54 mm Pitch Connectors Manufacturer and B2B Supplier

 

Industrial-grade 2.54 mm (0.100 inch) pitch header pins, sockets, and board-to-board connectors engineered for PCB interconnect applications. Standard configurations in stock; custom pin lengths, selectively plated options, and high-temp insulator materials available for OEM/ODM production.

 

 
First 1234567 Last
 
Connector Series Overview
 

Pin Headers (Male)

Single, dual, and triple rows; straight, right-angle, and surface-mount (SMT) styles.

Female Headers (Socket)

Top-entry, bottom-entry, and side-entry designs with dual-wipe phosphor bronze contacts.

Box Headers and Shrouded Headers

Latching and keyway options to prevent reverse insertion in industrial environments.

IDC Sockets and Cable Assemblies

2.54 mm pitch ribbon cable connectors for internal harness routing.

 

Specifications and Configuration Options
 

Parameter

Technical Standard / Range

Pitch

2.54 mm / 0.100 inch

Current Rating

3.0 A AC/DC max

Voltage Rating

250 V AC/DC max

Contact Resistance

Less than or equal to 20 mOhm initial

Insulation Resistance

Greater than or equal to 1000 MOhm at 500 V DC

Withstanding Voltage

1000 V AC per minute

Operating Temperature

-40 deg C to +105 deg C (Gold) / -25 deg C to +85 deg C (Tin)

Contact Material

Brass (Standard male pin) / Phosphor Bronze (High-reliability socket)

Contact Plating

Gold Flash, Selective Gold (3 u" to 30 u"), Bright Tin, Matte Tin over Nickel

Insulator Material

PBT (Wave solder) / PA6T / LCP (Reflow solder up to 260 deg C peak)

Terminal Types

Through-Hole (DIP), Surface Mount (SMT), Press-Fit

 

Custom pin profiles (Overall Length, Mating Length, Tail Length) are produced via automatic high-speed pin-heading machines based on buyer Gerber/drawing requirements. 

 

Substitute 70634-4001-P,70634-4002-P,70634-4003-P,70634-4004-P,70634-4005-P,70634-4006-P,70634-4007-P,70634-4008-P,70634-4009-P,70634-4010-P,70634-4011-P,Wafer

 

Applications

Industrial Controls and Automation: PLC mainboards, I/O modules, and drive controllers requiring vibration-resistant signal paths.


Power and Energy Systems: Inverter control units, battery management systems (BMS), and smart metering devices.


Embedded Computing and IoT: Single-board computers (SBCs), sensor modules, and gateway expansion headers.


Medical Devices: Diagnostic equipment sub-assemblies conforming to IPC-A-610 Class 2/3 assembly requirements.

 

 

Manufacturing and Quality Control

Automated Optical Inspection (AOI): 100% inline vision systems verify pin coplanarity (SMT tolerance within 0.10 mm), pin pitch, and header alignment before packaging.

 

Material Traceability: Raw brass, phosphor bronze, and resin batches are assigned lot numbers linked to mill test reports (MTR).

 

Plating Thickness Testing: X-ray fluorescence (XRF) analyzers confirm gold and nickel layer thickness on every plating lot.

 

Environmental and Mechanical Verification: Lab testing includes salt spray corrosion exposure, insertion/withdrawal force logging, and solderability tests per J-STD-002 standards.

 

Compliance: Fully compliant with RoHS 3 (EU 2015/863), REACH, and UL94V-0 flammability standards.

Substitute 74099-0642,74099-0643,74099-0644,74099-0645,74099-0646,74099-0647,74099-0648,74099-0649,74099-0650,74099-0651,74099-0652,Wafer

 

OEM/ODM and Bulk Supply Capabilities

Custom Pin Engineering

Pin lengths can be customized in 0.1 mm increments without tooling fees for standard pin header bodies.

Packaging Solutions

Tape and Reel with pick-and-place caps for automated SMT lines, anti-static tube, or bulk tray options.

Cross-Reference Engineering

Direct drop-in replacements for standard part numbers from major manufacturers (including Samtec TSM/TSW series and Molex KK 254).

Supply Chain Support

PPAP Level 3 documentation, scheduled shipments, buffer stock agreements for qualified OEM accounts, and standard sample dispatch within 3 to 5 business days.

 

 

Our Factory

 

productcate-1-1

 

 

FAQ

 

Q: What insulator material should I specify for reflow soldering?

A: Specify High-Temperature Nylon (PA6T) or Liquid Crystal Polymer (LCP). These materials withstand peak reflow temperatures of 260 deg C for 10 seconds. Standard PBT is recommended only for wave soldering processes up to 230 deg C.

Q: What is the difference between Gold Flash and Selective Gold plating?

A: Gold Flash coats the entire contact with a thin layer of gold (around 1 u" to 2 u"), suitable for low-cycle cost-sensitive applications. Selective Gold applies gold (e.g., 10 u" or 30 u") only to the mating contact point while using tin on the solder tail, reducing material cost without sacrificing contact integrity or solderability.

Q: What is the SMT coplanarity spec for surface-mount headers?

A: Standard coplanarity is maintained within 0.10 mm (0.004 inch) across the full length of the connector body up to 40 positions, ensuring reliable solder joint formation during SMT assembly.

Q: Can you supply drop-in replacements for Samtec or Molex 2.54 mm connectors?

A: Yes. Matching form, fit, and electrical function can be provided based on competitor part numbers or engineering drawings. Pin length, insulator height, and PCB layout compatibility are confirmed prior to sampling.

Q: What compliance documentation accompanies bulk shipments?

A: Every production shipment includes a Certificate of Conformance (CoC), RoHS/REACH compliance declarations, and material test reports upon request. Full UL safety certification documentation is available for export audits.

Q: What is the typical lead time for custom pin length orders?

A: Standard production lead time is 2 to 3 weeks following drawing sign-off and sample approval. Expedited production slots are available for urgent pre-production runs.

 

modular-1
Request a Quote

To help us review the correct connector or wire harness, please provide the following information where available:
Connector type and circuit count
Original part number, drawing, or sample
Mounting style and PCB footprint
Rated current, voltage, and operating temperature
Wire gauge, wire length, and pin assignment for harnesses
Required contact plating and compliance documentation
Estimated order quantity, packaging requirements, and target delivery date

We're well-known as one of the most professional 2.54mm pitch suppliers in China. With abundant experience, we warmly welcome you to buy bulk advanced 2.54mm pitch made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.

A2543 DuBan2 54 2 54mm Housing Terminal Wafer
Send Inquiry