0.60mm Pitch Connectors Manufacturer & Supplier
CSG supplies 0.60mm pitch connectors for compact PCB assemblies where connector dimensions, circuit configuration, and electrical requirements must match the target design. For electronics manufacturers, OEM buyers, and component distributors, selecting the right connector involves more than pitch alone. Connector type, mating height, mounting orientation, PCB footprint, and electrical ratings must also be verified.
-
Substitute JST SM16B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JSTSM15B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM14B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM12B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JSTSM10B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM09B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM08B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-AngleSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM06B-XSRS-ETB0.60mm Pitch,Header,SMD,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM04B-XSRS-ETB 0.60mm Pitch,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Substitute JST SM02B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Replaces JST SM16B-XSRS-ETBSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
-
Replaces JST SM15B-XSRS-ETB 0.60mm Pitch,Header,SMD,Right-Angle,Gold(Au) PlatingSpecifications:Rated current: 0.2A AC, DCRated voltage: 30V DCTemperature range: -40 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 100M Omega Min.Withstand pressure:
Specifications & Configuration Options
|
Parameter |
Specification Details |
|
Pitch |
0.60 mm |
|
Circuit Sizes (Positions) |
10 to 80 circuits (custom pin counts available) |
|
Rated Current |
0.5A to 1.0A per contact (dependent on circuit size and wire gauge) |
|
Rated Voltage |
50V AC/DC |
|
Contact Resistance |
Max. 50 mΩ initial |
|
Insulation Resistance |
Min. 100 MΩ |
|
Dielectric Withstanding Voltage |
200V AC for 1 minute |
|
Operating Temperature |
-40°C to +85°C (including temperature rise) |
|
Durability (Mating Cycles) |
20 to 30 cycles |
|
Housing Material |
LCP (Liquid Crystal Polymer), UL 94V-0, Black |
|
Contact Material |
Copper alloy (Phosphor bronze / Brass) |
|
Plating |
Contact area: Gold flash over Nickel; Solder tails: Tin over Nickel |
|
Packaging |
Embossed Tape & Reel (supports automated pick-and-place assembly) |
What Buyers Should Verify Before Ordering
Mechanical compatibility
Check mating dimensions, connector height, terminal arrangement, and PCB footprint.
Electrical compatibility
Verify current, voltage, contact resistance, and insulation requirements.
Assembly compatibility
Confirm SMT requirements, soldering conditions, and packaging for automated assembly.
Environmental requirements
Check operating temperature, durability, and applicable compliance requirements.

Consumer Electronics: Compact electronic devices and space-constrained PCB assemblies.
Portable Medical Equipment: Electronic modules requiring connector dimensions and electrical ratings matched to the device design.
Industrial Electronics: Compact control boards, sensor modules, and electronic assemblies.
Automotive Electronics: Applications requiring the relevant environmental, electrical, and automotive qualification tests.
Dimensional Inspection: Verification of pitch, terminal position, mating dimensions, and mounting geometry against approved drawings.
Terminal Inspection: Checks on terminal forming, contact geometry, and plating specifications.
Electrical Testing: Contact resistance, insulation resistance, and dielectric withstand testing, where applicable.
Mechanical Testing: Insertion and withdrawal force, mating durability, and other tests specified for the selected series.
Material & Compliance Documentation: Applicable material declarations, test reports, and quality-system certificates.

OEM/ODM & Bulk Supply
Custom Engineering
Modifications to circuit counts, stacking heights, plating thicknesses (selective gold plating), and actuator designs for FPC locks.
Prototyping Support
3D STEP models and engineering evaluation samples dispatched within 5 business days.
Logistics & Packaging
Anti-static carrier tape packaging compliant with EIA-481 standards, supported by vacuum-sealed moisture barrier bags with desiccant and humidity indicator cards.
Supply Stability
Scalable monthly output exceeding 5 million units with buffer stock programs available for contracted global buyers.
Our Factory

FAQ

Information to Include in Your RFQ
To help us assess fit, compatibility and pricing, please provide:
Required circuit count and connector configuration.
Original part number, drawing, sample or PCB footprint, if available.
Wire gauge, insulation outer diameter and required cable length.
Current, voltage, operating temperature and environmental requirements.
Contact plating, compliance documentation and testing requirements.
Estimated annual demand, initial order quantity and target delivery schedule.
We're well-known as one of the most professional 0.60mm pitch suppliers in China. With abundant experience, we warmly welcome you to buy bulk advanced 0.60mm pitch made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Alternatives JST SM14B XSRS ETB
