2.00mm Pitch Connectors & Wire Harness Assemblies – OEM/ODM Manufacturer
As an ISO 9001 and IATF 16949 certified manufacturer, we produce 2.00mm pitch interconnect products including Board-to-Board, Wire-to-Board, and Wire-to-Wire series. Designed for high-density PCB layouts, our connectors provide stable electrical continuity across industrial controllers, medical instrumentation, automotive modules, and telecommunication systems.
We supply direct drop-in cross-references for major industry standards (including JST PH series, Molex Micro-Blade, and Samtec 2.00mm lines) with complete material traceability and custom pin-length options.
-
A2018(PUD)alternative PUD 2.00 Housing Terminal Wafer CableSpecifications:Rated current: 3A AC, DCRated voltage: 250V DCTemperature range: -25 deg C to +105 deg CContact resistance: 30m Omega Max.Insulation resistance: 500M Omega Min.Voltage: 500V
-
A2019(PND)alternative PND 2.00 Housing Terminal Wafer CableSpecifications:Rated current: 3A AC, DCRated voltage: 250V DCTemperature range: -25 deg C to +105 deg CContact resistance: 10m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
2.00mm Single And Double Row Pin Heade And Female Heade Substitute SamtecSpecifications:Rated current: 2A AC, DCRated voltage: 250V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Voltage: 500V
-
Alternative PHR-15,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-14,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-13,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-12,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-11,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-10,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-9,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-8,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
-
Alternative PHR-7,Housing Terminal Cable WaferSpecifications:Rated current: 2A AC, DCRated voltage: 125V DCTemperature range: -40 deg C to +105 deg CContact resistance: 20m Omega Max.Insulation resistance: 1000M Omega Min.Withstand pressure:
2.00mm Interconnect Series Options
2.00mm Pitch Connector Product Range
|
Connector Type |
Typical Configuration |
Common Applications |
|
Pin Headers |
Straight or right-angle; through-hole or other available mounting styles |
PCB connections, control boards, electronic modules |
|
Female Headers |
Matching socket configurations, subject to series design |
Board-to-board connections and PCB interfaces |
|
Wire-to-Board Connectors |
Wire crimp terminals with PCB-mounted headers or wafers |
Power and signal wiring inside electronic equipment |
|
Wire-to-Wire Connectors |
Plug and receptacle housings with crimp terminals |
Internal wiring harnesses and modular assemblies |
|
Box / Ejector Headers |
Keyed or shrouded configurations; circuit counts depend on series |
Control systems, embedded electronics, and cable interfaces |
|
Crimp Terminals and Housings |
Selected terminal designs for specified wire sizes |
OEM harness production and replacement assemblies |
|
Custom Wire Harnesses |
Connector-to-wire assemblies based on approved drawings |
Equipment integration and contract manufacturing |
Electrical and Mechanical Specifications
|
Parameter |
Indicative Specification |
Buyer Considerations |
|
Pitch |
2.00mm |
Confirm the actual mating pitch and dimensional drawing |
|
Circuit Count |
Model-dependent; selected headers may be available in multi-position configurations |
Specify the exact number of circuits |
|
Rated Current |
Proposed range: 2–3A |
Depends on contact design, circuit loading, wire gauge, and temperature rise |
|
Rated Voltage |
Proposed value: up to 250V |
Confirm the rating for the selected connector series and applicable safety requirements |
|
Contact Resistance |
Proposed initial value: ≤20mΩ |
Confirm test method and model-specific limits |
|
Post-Environmental Contact Resistance |
Proposed value: ≤30mΩ |
Confirm the environmental test conditions and acceptance criteria |
|
Insulation Resistance |
Proposed value: ≥1,000MΩ at 500V DC |
Verify the test voltage, duration, and acceptance criteria |
|
Dielectric Withstanding Voltage |
Proposed value: 800V AC for 1 minute |
Confirm the rating and test conditions for the selected model |
|
Wire Gauge |
Proposed range: AWG 24–30 for compatible wire-to-board or wire-to-wire series |
Match conductor size, insulation diameter, and crimp terminal |
|
Operating Temperature |
Proposed range: -40°C to +105°C; higher-temperature options may be available for selected designs |
Confirm the housing, terminal plating, and complete assembly rating |
|
Contact Plating |
Tin or selective gold options, depending on series |
Specify the required plating, thickness, and application |
|
Durability |
Model-dependent; tin- and gold-plated contacts may have different cycle ratings |
Confirm the mating-cycle requirement and applicable test report |
Materials and Contact Plating Options
|
Component |
Proposed Options |
Selection Considerations |
|
Insulator Housing |
PA6T, PA9T, or LCP, depending on design |
Operating temperature, dimensional stability, assembly process, and flammability rating |
|
Contacts |
Phosphor bronze or brass, depending on contact design |
Contact force, conductivity, forming requirements, and application |
|
Contact Finish |
Tin plating or selective gold plating, where available |
Contact resistance, corrosion environment, mating frequency, and cost |
|
Underplating |
Nickel may be specified for compatible plating systems |
Confirm layer structure and thickness against the product specification |

Industrial Automation: PLC I/O modules, servo drive control boards, motor encoders, and industrial sensors.
Medical Equipment: Patient monitoring devices, ultrasound sub-assemblies, and diagnostic handheld instruments.
Automotive & Transportation: Battery Management Systems (BMS), infotainment modules, and auxiliary ECU wiring.
Telecom & Networking: Network switches, router control panels, and server backplanes.
Consumer Electronics & Smart Home: LED displays, HVAC controllers, and power sub-boards.
Production takes place in automated facilities equipped with high-speed pin insertion machinery, CCD visual inspection units, and high-speed stamping presses.
[Raw Material IQC] --> [Precision Stamping & Molding] --> [Automated Pin Insertion] --> [Shipment Inspection] <-- [100% CCD Visual & Continuity] <-- [Plating Thickness Test]
Every production batch undergoes mandatory verification before shipment:
Plating Thickness Analysis: X-Ray Fluorescence (XRF) testing verifies exact gold/nickel layer depth on critical contact zones.
Dimensional & Pin Alignment: Automated CCD optical systems detect pin coplanarity within +/- 0.05 mm for accurate SMT pick-and-place operation.
Solderability & Thermal Stress: Steam aging followed by 260 degrees C reflow profile simulation checks for resin warping or pin loosening.
Mechanical Retention Test: Push-pull force testers measure pin retention force (>= 1.0 kgf/pin) to prevent terminal push-out during assembly


Customization Options
- Pin Geometry: Custom pin length, mating pin tail length, and selective plating locations.
- Custom Wire Harnesses: Cut-to-length wire assemblies using UL1007 / UL1061 wires (AWG #24 to #30) with custom pinouts, twisting, sleeving, and terminal crimp force validation (crimp height pull-out force reports included).
- Insulator Modifications: Custom color coding, polarization keying removal, or specific standoff height additions.
Supply Chain & Purchasing Terms
- Lead Time: 3–5 working days for standard sample delivery; 2–3 weeks for mass production volumes.
- Packaging Formats: Tape & Reel with Kapton pick-up caps for automated SMT lines, Tube packaging, or Tray packaging for through-hole pins.
- Documentation Support: 3D STEP files, 2D CAD drawings, RoHS / REACH / UL compliance certificates, and IMDS documentation available upon request.
Our Factory

FAQ

What information is needed for a quotation?
To help us assess the correct product and quotation, please provide:
Connector type and 2.00mm pitch confirmation
Circuit count and mounting style
Original part number or drawing, if available
Electrical ratings and operating temperature
Wire gauge and harness requirements, if applicable
Estimated order quantity and target delivery schedule
Required compliance documents and packaging format
We're well-known as one of the most professional 2.00mm pitch suppliers in China. With abundant experience, we warmly welcome you to buy bulk advanced 2.00mm pitch made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Substitute PUDP 22V S, Substitute 51004 0300, Substitute PUDP 08V S
